ARGOX OS-2140E PPLA DRIVERS PC

ARGOX OS-2140E PPLA DRIVER DETAILS:

Type: Driver
File Name: argox_os_10558.zip
File Size: 11.6 MB
Rating:
3.7
11 (3.7)
Downloads: 9
Supported systems: Windows All
Price: Free* (*Free Registration Required)

Download Now
ARGOX OS-2140E PPLA DRIVER



Once it completes, the printer will automatically resume the printing tasks sent previously. Close the printer module and then press firmly at both the left and the Argox OS-2140E PPLA of Argox OS-2140E PPLA module to properly latch. Press FEED button to resume printing. As soon as all the data has been received, Ready LED will stay solid green and automatically resume normal operation.

ARGOX OS-2140E PPLA WINDOWS 8 DRIVERS DOWNLOAD (2019)

Argox OS-2140E PPLA Check if the communication cable serial is connected securely to your serial port on the PC and to the connector on the printer at the other end. Check if the printer power is turned on. If the data has been sent, but there is no output from the printer. Check the active printer driver, and see if Seagull driver for your Windows system and the label printer has been selected. Vertical streaks Argox OS-2140E PPLA the printout usually indicate a dirty or faulty print head.

Products & Services

Refer to the following examples. Clean the print head.

  • Argox CP Desktop Barcode Printer - QR Barcode
  • Mac Thermal Driver For OSX - Print Directly To Label Printers On OSX
  • Argox OS-2140E Labelprinter
  • Argox Cp 2140 / Cp 2140e (203 Dpi) Barcode Printers
  • Logotech Systems
  • Argox条码打印机设置工具

If the problem persists, replace the print head. The ribbon may not be qualified.

Products & Services New Vision Labels

The media may not be qualified. Adjust the Darkness heat temperature.

ARGOX OS-2140E PPLA TREIBER

Slow down the print speed. Argox OS-2140E PPLA to the next chapter and clean the related spare parts. Recovery After correcting problems, simply press the panel button or restart the printer to continue your print jobs. Make sure the LEDs are not blinking and remember to resend your files.

A variety of interface options are suitable for versatile applications: You must insert the power supplys barrel connector into the power jack on the back of the printer before connecting communication cables. Use of Argox OS-2140E PPLA cables or unshielded cables may increase radiated emissions above Class A Argox OS-2140E PPLA. The USBs plug and play design makes installation easy. The other end of the signal interface cable connects to a serial port on the host computer. For technical and pin-out information, please refer to the Technical Reference, Interface Specifications in this manual.

Parallel Interface Requirements The required Argox OS-2140E PPLA IEEE compliant is recommended must have a standard pin parallel connector on one end, which is plugged into the parallel port located on the back of the printer. The other end of the parallel interface cable connects to the printer connector at the host computer.

Serial and Parallel Cabling Requirements Data cables must be of fully shielded construction and fitted with metal or metalized connector shells. Shielded cables and connectors are required to prevent radiation and reception of electrical noise.

To minimize electrical noise pickup in the cable: Keep data cables as short as possible. Do not tightly bundle the data cables with power cords. Do not tie the data cables to power wire conduits.

ARGOX OS-2140E PPLA TREIBER WINDOWS XP

The new CP and CPE printers continues Argox's leading position in innovation, 1D Barcodes, PPLA: Code 39、UPC-A、UPC-E、Code subset. CP/CPE, CPZ, PPLZ. Icon.

Dell OptiPlex 755 AMD Radeon HD 2400 XT GraphicsRelated titles
Acer Aspire 8942G LANProduct Details

CPZ Ver KB. CPM, CPM-Ba, PPLA/PPLB.

Icon. CPM-Ba Ver

Related Drivers