DRIVERS FOR ONSET HOBO UX100-014 DATA LOGGER

ONSET HOBO UX100-014 DATA LOGGER DRIVER DETAILS:

Type: Driver
File Name: onset_hobo_36205.zip
File Size: 8.6 MB
Rating:
3.16
3 (3.16)
Downloads: 1
Supported systems: Windows 2008, Windows XP, Windows Vista, Windows 7/8/10
Price: Free* (*Free Registration Required)

Download Now
ONSET HOBO UX100-014 DATA LOGGER DRIVER



The logger also has an internal 10K thermistor for cold-junction compensation of the thermocouple output.

ONSET HOBO UX100-014 DATA LOGGER DRIVER FREE

The thermocouple channel has a bit resolution while the internal 10K thermistor has bit resolution. Using HOBOware, you can easily configure the logger alarm to trip for specific high or low temperatures.

Onset HOBO UX100-014M Type J, K, T, E, R, S, B, N Thermocouple Data Logger

Or, you can set up burst logging in which the logger records data at a different interval during certain conditions. The Onset HOBO UX100-014 Data Logger can also calculate minimum, maximum, average, and standard deviation statistics. This compact data Onset HOBO UX100-014 Data Logger has a built-in LCD screen to monitor temperature, logging status, battery use, and memory consumption in between readouts. Press this button for 3 seconds to start or stop logging data, or to resume logging on the next even logging interval. This requires configuring the logger in HOBOware with a push button start or stop, and with Resume logging on next button push selected see Setting up the Logger.

Remove the battery tray on the top of the logger to access the logger battery see Battery Information. Use this button to clear a tripped alarm see Setting up Alarms or to switch between statistics, alarm readings, and the current temperature reading.

Internal 10K Thermistor Temperature: The internal 10K thermistor not visible in the diagram measures ambient temperature, if the channel is configured to log in HOBOware see Setting up the Logger. Use the two mounting loops to mount the logger with the hook-and-loop strap see Mounting the Logger. This logger is equipped with an LCD screen that displays details about the current status. This example shows all symbols illuminated on the LCD screen followed by definitions of each symbol in the table below. Onset HOBO UX100-014 Data Logger

MeterMall USA Profile

If you also launched the logger with a push button start, this symbol will not appear on the display for 30 seconds. The battery indicator shows the approximate battery power remaining. The logger has been configured to stop logging when memory fills.

The memory bar indicates the Onset HOBO UX100-014 Data Logger space remaining in the logger to record data. When first launched, all five segments in the bar will be empty. In this example, the logger memory is almost full only one segment in the memory bar is empty.

The logger has been configured to never stop logging wrapping. The logger will continue recording data indefinitely, Onset HOBO UX100-014 Data Logger newest data overwriting the oldest data. When first launched, all five segments in the memory bar will be empty. In this example, the memory is full all five segments are filled in and new data is now overwriting the oldest data. This will continue until the logger is stopped or the battery runs out. The logger is currently logging.

NEW DRIVER: ONSET HOBO UX100-014 DATA LOGGER

A sensor reading is above or below the high or low alarm that you configured. This symbol at left will clear depending on how alarms were configured in HOBOware. If the alarm was configured to clear when the logger is relaunched, this symbol will remain on the LCD.

  • HOBO UX Type J, K, T, E, R, S, B, N Thermocouple - UXM HOBO Data Loggers Australia
  • HOBO UX Type J, K, T, E, R, S, B, N Thermocouple - UXM HOBO Data Loggers Australia
  • Scottech - Scott Technical Instruments : HOBO UX Temp/RH Dataloggers
  • Onset HOBO UX100-014M [UX100-014M] Type J, K, T, E, R, S, B, N Thermocouple Data Logger
  • HOBO External Temperature/RH Data Loggers
  • HOBO Type J/K/T/E/R/S/B/N Thermocouple Temperature Data Logger
  • Onset Hobo U12-014 Type J K S T Thermocouple Data Logger

An alarm is ready to be cleared. These symbols show the maximum, minimum, average, and standard deviation values most recently calculated for the logger if the logging LCD Symbol Description mode has been set to Statistics in HOBOware. This is the sensor reading that tripped the alarm. This is an example of a temperature reading. Temperature units are determined by the settings in HOBOware. The display will count down in days, hours, minutes, and seconds until logging begins. In this example, 5 minutes and 38 seconds remain until logging will begin.

The launch settings are being loaded onto the logger from HOBOware. Do not disconnect the USB cable during this process. An error occurred while loading the launch configurations onto the logger from HOBOware. Make sure the USB cable is connected to both the logger and the computer and try launching again. The logger has been stopped with HOBOware or because the memory Onset HOBO UX100-014 Data Logger full. You can disable the LCD screen when logging. Select Turn LCD off when setting up the logger as described in the next section.

HOBO UX100-014M Type J, K, T, E, R, S, B, N Thermocouple Data Logger

The LCD will then remain on for 10 minutes. The HOBO UXM Single Channel Thermocouple data logger records temperature in indoor environments with thermocouple sensors. The HOBO UX Series is Onset's next-generation family of data loggers for HOBO Type J, K, T, E, R, S, B, N Thermocouple Data Logger - UXM.

Related Drivers